Hydraulic magnetic circuit breaker unipolar (HM2)

This one pole hydraulic magnetic circuit breaker complies with standard EN 60934 and meets standard NF F 62-001 (railway rolling stock). The rating possibilities range from 1 Amps up to 50 Amps. Use in direct current (DC) (90VDC) or also in alternating current (AC) (up to 424 Volts 50/60 Hertz).

Hydro-magnetic circuit breakers have no thermal inertia after tripping, reclosing is effective immediately.

They also have no variation in caliber depending on ambient temperature. The nominal current of a HYDRO-MAGNETIC micro-circuit breaker does not vary whatever the ambient temperature.

Technical characteristics

NUMBER OF POLES : 1 pole

CONTROL SYSTEM : Long handle

MOUNTING :
By ISO M3 screw
By 6-32 inch screw

CONNECTION :
Flush mounting models

CURVES + RATED CURRENT :
Hydraulic Magnetic : 1A – 50A

NORMES :
EN 60934    (Circuit breaker for equipment)
NF F62-001   (Micro-circuit breaker for railway rolling stock)
EN 45545-2   (Smoke fire behavior test)
EN 61373   (Vibration and shock tests)
EN 60068-2-11   (Salt spray test)
UL 1077  (Supplementary protectors)